Compaq P5000 Series - Manual (Page 112)

112
Chapter 4 PRINTER CONTROL
PRINTER CONTROL
The printer control menu allows you to choose the printer’s behavior. Options
on this menu, as shown below, are described in the following pages.
Unidirectional
The Unidirectional feature affects both print quality and printing speed. By
setting this feature, you can configure the printer to print in both directions of
the shuttle sweep (bidirectional), or to print in one direction only
(unidirectional).
You might want to enable this feature when printing bar codes, high quality
text and graphics, or other printing that requires precise vertical alignment.
Although enabling this feature reduces print speed, it enhances the vertical
alignment of dots and produces cleaner, sharper bar codes and text.
• Disable. The default. The printer will print all data in both directions of the
shuttle sweep (bidirectional printing). This choice produces higher printing
speed.
• Enable. The printer will print all data in only one direction of the shuttle
sweep (unidirectional printing). This choice produces higher print quality.
PRINTER
CONTROL
Unidirectional PMD Fault Slow Paper
Slew
Power Saver
Time
Disable*
Enable Enable*
Disable Disable*
Enable 15 mins.*
(5 sec.-60 min.)
To view options, press:
⇓
Down
⇑
Up
⇒
Next
⇐
Prev
To select an option, press ENTER.
To return to main menu, press
CLEAR.
To exit menu, press ONLINE.
* = Default Setting