Downloading data from the receiver, Exit, Learning ng! *(play) – Sony STR-DB940 User Manual

Page 83: D0wnl0ad> ^function tuner info cd disc name

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press the appropriate button on the remote control

to send the remote control code
Lightly pressing the button once should be sufficient
In about 3 to 5 seconds, it is displayed whether
learning was successful or not
When the learning completes successfully, "Learning
OK!", the number of keys, and the capacity used for

learning are displayed

[UIDEO 2 ]

■ (PLAY)

Learning OK!

(15/80

20-/.)

when the learning does not complete successfully, the

cause is displayed

Learning NG!

*(PLAY)

p[J[_(_ (Keys)

---------- information*

^EXIT__________

* FULL (Keys): shortage of buttons

FULL (memory): shortage of memory

ERROR: other causes

To cancel learning

Move the easy scroll key to select "EXIT" or "CANCEL"

during any step, then press the key to enter the selection

To erase the learned code

In step 6 above. Move the easy scroll key to select "CLEAR",

then press the key to enter the selection The number of

buttons and the capacity used for learning are displayed

The marks that are displayed in front of the button name

indicate the following

■ : already learned

^ : pre-programmed

? In step 3, learned buttons can be selected directly

If you press the button you want to use for the Learned function,

the list will jump to the same button

9 The Learned function can be applied to the SUB menus

SUB 1 ~ SUB 5 can be learned

Notes

• You can program up to 80 buttons for the Learned function

In some cases, you may not be able to program even if you have not
programmed 80 buttons

• If you select "IR SET” for a component that already has a learned

button setting the learned codes for that component are cleared
Furthermore, if the cleared learned button is used in a Macro Play

setting the setting for that button will be changed to "NO SET"

Downloading Data From

the Receiver

The remote communicates with the receiver every time a

button is pressed on the remote and displays the current

operation status of the receiver on the display window

The remote can also download index names of the
program sources, preset stations, CD disc names

(memos)*, and information indicating the presence or

absence of a CD in each slot of a CD changer* from the

* Appears only when you have selected a Sony CD changer (5,50,200,

300, or 400 discs) connected to the receiver using the CONTROL A1

cable

Be sure to turn on the receiver and point the remote

towards the receiver when performing the following

procedure

Press SET UP.

The set up list appears

Move the easy scroll key to select "DOWNLOAD/'

then press the key to enter the selection
The DOWNLOAD list appears

^FUNCTION

TUNER INFO
CD DISC NAME

To download index names

Move the easy scroll key to select "FUNCTION,"

then press the key to enter the selection

To download preset stations

Move the easy scroll key to select "TUNER INFO,'

then press the key to enter the selection

Using a command that has been learned

When selecting a learned function, press the button used
to learn that function