Sony STR-DB940 - Manual (Page 67)

T
able of contents
UnderstaiKling the 2 way remote system
This remote operates under a 2 way remote system With
the two way remote system, the component responds to
signals sent from the remote by sending addiHonal signals
(information about the status of the component, text data,
etc) back to the remote Thus, operations are performed
as a result of communication between the remote and the
component
Remote Component
When using a home entertainment system comprised of
several components compatible with the 2 way remote
system, please restrict 2 way remote system operation to a
single component Normally, turn off the 2 way remote
system on all components except the receiver
If you would like to turn off the receiver's 2 way remote
system, see "Setting up the 2 way remote" in the
operating instructions supplied with the receiver
Setting up the remote
At the time of shipping, the remote has not been
customized to your receiver yet Before you use the
remote for the first time, do the procedure below to set
up the remote so that it can control your receiver
properly
1 Pressl/d) on the receiver to turn it on
2 Point the remote towards the receiver and press
SOUND FiELD, FUNCTiON, or SUB
and » appear in the display window of the
remote while it communicates with the receiver and
identifies the receiver model
When the communication ends, the remote is
customized and provides the operation lists that
match your receiver
Location of Parts and Basic Remote
Operations 4
Parts Description 4
Using the Lists 12
chart of Lists 13
Selecting a Component 14
Selecting a Sound Field 15
Programming the Remote 16
Performing Several Commands in Sequence
Automatically (Macro Play) 17
Learning the Commands of your components 18
Downloading Data From the Receiver 19
Other Operations 21
Additional Information 22
Troubleshooting 22
Specifications 23