Sony STR-DB940 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Hookups
e
o
K
3'
c
r
?
3
■ a
0
3
«
3
cr
Connecting the AC power cord
Before connecting the AC power cord of this receiver to a
wall outlet:
• Connect the speaker system to the receiver (see page
16
)
• Turn the MASTER VOLUME control to the leftmost
position (0)
Coimect the AC power cord(s) of your audio/video
components to a wall outlet
If you coimect other audio/video components to the AC
OUTLET(s) on the receiver, the receiver will supply power
to the connected component(s), allowing you to turn the
whole system on or off when you turn the receiver on or
off
Caution
Make sure that the total power consumption of the component(s)
connected to the receiver's AC OUTLET(s) does not exceed the
wattage stated on the rear panel Do not connect high-wattage
electrical home appliances such as electric irons, fans, or TVs to
this outlet
Note
If the AC power cord is disconnected for about two weeks, the
receiver's entire memory will be cleared and the demonstration
will start
14