Using the sleep timer – Sony STR-DB940 User Manual

Page 52

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording

Using the Sleep Timer

Recording on a video tape

You can record from a VCR, a TV, or an LD player using

the receiver You can also add audio from a variety of
audio sources when editing a video tape See your VCR

or LD player's instruction manual if you need help

Select the program source to be recorded

Prepare the component for playing

For example, insert the laser disc you want to record
into the LD player

Insert a blank video tape into the VCR (VIDEO 1 or

VIDEO 2) for recording

Start recording on the recording VCR, then start

playing the video tape or laser disc you want to
record

9 You can record the sound from any audio source onto a

video tape while copying from a video tape or laser disc

Locate the point where you want to start recording from another
audio source, select the program source, then start playback The
audio from that source will be recorded onto the audio track of
the video tape instead of the audio from the original medium

You can set the receiver to turn off automatically at a
specified time

Press SLEEP on the front panel (except for models of

area code CED) or on the remote while the power is
on
Each Hme you press SLEEP, the time changes as shown

below

► 2:00:00 —*■ 1:30:00-» 1:00:00 -* 0:30:00 -► OFF -

j—» 2:00:01

□

The display dims after you have specified the time

^ You can freely specify the time

First, press SLEEP, then specify the time you want using the jog
dial on the receiver The sleep time changes in 1 minute intervals

You can specify up to 5 hours

You can check the time remaining before the receiver turns

off

Press SLEEP The remaining time appears in the display.

To resume audio recording from the original medium, select the
video source again

Notes

• Please be sure to make both digital and analog connections to

the TV / SAT and DVD / LD inputs Analog recording is not
possible if you only make digital connections

• Some sources contain copy guards to prevent recording In this

case, you may not be able to record from the sources