Learning the commands of your components, Grower, Leprning> [uideq 1 ] ^[uideo 2 ] [uideq 3 – Sony STR-DB940 User Manual
Page 82: Button[uideo, Reuerse ilcplqy
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
la
Performing Several Commands in Sequence
Automatically (Macro Play)
C In step 6, when is displayed in front of the function
The function is pre-programmed
Q In step 3 and
1,
when is displayed after the program
number.
The codes have already been programmed
Note
If you select "IR SET" for a component that already has a learned
button setting, the learned codes for that component are cleared
Furthermore, if the cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to "NO SET"
Starting macro play
1
Press FUNCTION
The function list appears
2
Move the easy scroll key to select "MACRO 1" or
"MACRO 2", then press the key to enter the
selection
The IR codes appear in the display window as they are
performed
Notes
• Pressing any of the following buttons during a macro play
operation will cancel the macro play sequence before it is
complete
- AV
I/6
- l/(!)
- SYSTEM STANDBY
- SOUND FIELD
- FUNCTION
- SET UP
• When the Macro Play function does not work properly, set
"WAIT TIME" between each operation
Learning the Commands of
your components
By using the Learning function, it is possible for this
commander to perform learned operations
Setting remote control codes that are not
stored in the commander
when a remote control code is not one of the presets
stored in the commander, it is possible for the commander
to learn the code using the Learning function
1
Press SET UP and move the easy scroll key to select
"LEARNING", then press the key to enter the
selection
The function list appears
[UIDEQ 1 ]
^[UIDEO 2 ]
[UIDEQ 3 ]
Move the easy scroll key to select the function you
want to use the Learning function, then press the
key to enter the selection
The button list appears
Button[UIDEO
GROWER
^■ REUERSE
ilcPLQY
2 ]
Move the easy scroll key to select the button you
want to use for the Learning function, then press
the key to enter the selection
The learning display appears
Point the remote code receiver section of the
commander toward the receiver/transmitter on the
remote control to be learned
About 5 cm ~ 15 cm
Move the easy scroll key to select "Learning Start",
then press the key to enter the selection
"Learrung Now!!" is displayed
18