Sony DCR-TRV510 - Manual (Page 90)

Troubleshooting
Symptom Cause and/or Corrective Actions
The Remote Commander supplied
with your camcorder does not work. • COMMANDER is set to OFF in the MENU settings.
Set it to ON. (p. 76)
• Something is blocking the infrared rays.
Remove the obstacle.
• The batteries are inserted in the battery holder with the h
polarities incorrectly matching the + - marks.
4 Insert the batteries with the correct polarity, (p. 104)
• The batteries are dead.
Insert new ones. (p. 104)
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR. • DISPLAY is set to V-OUT/LCD in the MENU settings.
Set it to LCD. (p. 76)
The melody or beep sounds for 5
seconds. • Moisture condensation has occurred.
Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize, (p. 94)
• Some troubles has occurred in your camcorder.
Remove the cassette and insert it again, then operate
your camcorder.____________________________________
While charging the battery pack, no
indicator appears or the indicator
flashes in Ae display window. • The AC power adaptor is disconnected.
-> Connect it firmly, (p. 9)
• Something is wrong with the battery pack.
•> Contact your Sony dealer or local authorized Sony
service hdUt}'. _____________________________________
90