Note, Notes – Sony DCR-TRV510 User Manual

Page 132

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If a message box appears indicating a communications problem, refer to steps 6 and 7 of
Connections and Settings, and perform the following steps:

• Decrease the baud rate.
• Confirm that the port settings are correct.

Note
If an image has been read and any of the following actions taken, repeat the procedure
from step 1.

- Power to the MS Serial Port Adapter has been turned off and back on.
- The cable has been disconnected.
- The Memory Stick was removed.

Notes

• After working with an image after viewing the List View, such as Single-Image

viewing, some time will be required to re-read the images.

• As the MS Serial Port Adapter and PC are busy communicating until all image are

read, do not disconnect the cable during this period.

• If an error occurs, disconnect and then reconnect the PC serial Cable at the MS Serial

Port Adaptor side.

V Hint

Please see page 25.

2 4