To stop playback – Sony DCR-TRV510 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
— Playback - Basics —
Playing back a tape
You can monitor the playback picture on the LCD screen or in the viewfinder. You can
control playback using the Remote Commander supplied with your camcorder.
(1) Install the power source and irjsert the recorded tape.
(
2
)
Set the POWER switch to VTR while pressing the small green button. The
video control buttons light up.
(3)
Open the ICD panel while pressing OPEN.
(4)
Press -4^ to rewind the tape.
(5)
Press ► to start playback.
(6)
To adjust the volume, press either of the two buttons on VOLUME. The
speaker on your camcorder is silent when the LCD panel is closed.
4
R^9
5
PLAY
6
'/HI
O
To stop playback
Press ■ .
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out [a]. You can adjust the angle of the LCD panel by lifting the LCD
panel up by 15 degrees
[b].
22