To view a still picture (playback pause), To advance the tape, To rewind the tape – Sony DCR-TRV510 User Manual
Page 24: To change the playback direction, To view the picture at slow speed (slow playback), To view the picture at double speed, To view the picture frame-by-frame, To search the last scene recorded (end search), In the various playback modes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
24
*/n; rrnr-. :Ti rr; irrr: *■. rTiTW №
K
To operate control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press II during playback. To resume playback, press II or ► .
To advance the tape
Press ► ► in the stop mode. To resume normal playback, press
To rewind the tape
Press in the stop mode. To resume normal playback, press ► *.
To change the playback direction
Press < on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press ► •
To locate a scene monitoring the picture (picture search)
Keep pressing or ► ► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing
while rewinding or ► ► while advancing the tape. To resume
rewinding or advancing, release button.
To view the picture at slow speed (slow playback)
Press !► on the Remote Commander during playback. For slow playback in the reverse
direction, press
To view the picture at double speed
Press x2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press <, then press x2 on the Remote Commander. To resume
normal playback, press ► .
To view the picture frame-by-frame
Press !!► on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press ◄ !!. To resume normal playback, press ► .
To search the last scene recorded (END SEARCH)
Press END SEARCH in the stop mode. The last 5 seconds of the recorded section plays
back and stops.
In the various playback modes
• Noise may appear when your camcorder plays back tapes recorded in the Hi8/
standard 8 system.
• Sound is muted.
• The previous recording may appear as a mosaic image when playing back in the
[^gltalS E) system.
When the playback pause mode lasts for 3 minutes
•Your camcorder automatically enters the stop mode. To resume playback, press
• The previous recording may appear.
Slow playback for tapes recorded in the DigitaiS Ef system
The slow playback can be performed smoodily; however, this function does not work
for an ou^ut signal from die i DVIN/OUT jack.