Sony DCR-TRV510 User Manual

Page 129

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If a message box appears indicating a communications problem, refer to steps 6 and 7 of
Connections and Settings, and perform the following steps:

• Decrease the baud rate.
• Confirm that the port settings are correct.

Note
If an image has been read and any of the following actions taken, repeat the procedure
from step 1.

- The digital still camera has been turned off and back on.
- The cable has been disconnected.
- Any new image has been taken, or an image deleted with the digital camera,
- The Memory Stick was removed from the camera (for devices that include a Memory

Stick).

Notes

• After working with an image after viewing the List View, such as Single-Image

viewing, some time will be required to re-read the images.

• As the digital still camera and PC are busy communicating until all image are read,

do not disconnect the cable during this period.

V Hint

Please see page 25.

• 2 1