Sony DCR-TR7000 - Manual (Page 56)

Changing the MENU settings
kon/item Mode Meaning
POWER
switch
@ WORLD TIME To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
CAMERA
BEEP • MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder VTR
CAMERA
NORMAL To output the beep instead of the melody
OFF To cancel the melody and beep sound
COMMANDER • ON To activate the Remote Commander supplied
with your camcorder VTR
CAMERA
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
REC LAMP • ON To light up the camera recording lamp at the
hunt of your camcorder CAMERA
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording
INDICATOR • BLOFF To turn off die backlight on display window VTR
BLON To turn on the backlight CAMERA
In more than S minutes after removing the power source
The "COMMANDER" and "HiFi SOUND" items are returned to their factory settings.
The odier menu items are held in memory even when the battery is removed, as long as
the lidiium battery is installed.
Notes on INDICATOR
• When you select "BL ON", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BL ON" is automatically
selected.
56