Sony DCR-TR7000 - Manual (Page 16)

Recording a picture
Recording starts when you press START/STOP, and stops when you press it again
, (factory setting).
ANTI GROUND SHOOTING i: The camcorder records only while you press START/
STOP. Use this mode to avoid recording unnecessary
scenes.
5SEC: When you press use this mode to START/STOP, your camcorder records for 5
seconck and then stops automatically.
START/STOPMODE J :C \ ANTI GROUND
SHOOTING
Notes
• You cannot use ttte fader function in the 5SEC or mode.
• The time code docs not appear in the 5SEC mode.
To extend the recording time in the 5SEC mode
Five dots (♦»#<) appear, and then disappear at a rate of one per second. To extend
the recording time, press START/STOP again before all the dots disappear. Recording
continues for about 5 seconds from the moment you press START/STOP.
The indicators are not recorded on tape.
- Format indicator
16
STANDBY/REC indicator
BlmiDlli>l IRECI — Time code/Tape counter
Remaining tape indicator
This appears after you insert a cassette for a while.
Remaining battery time indicator
Time code (for tapes recorded in the Digitals I) system only)
The time code indicates the recording or playback time, "0:00:00" (hours:minutes:
seamds) in CAMERA mode and "0:00:00:00" (hours:minutes:seconds:frames) in VTR
mode. You cannot rewrite only the time code. Your camcorder uses the drop frame
mode.
When you play back tapes recorded in the Hi8/standard 8 system, the tape counter
appears.,