Sony DCR-TR7000 - Manual (Page 54)

Changing the MENU settings
Icon/item Mode Meaning
POWER
switch
HiH SOUND • STEREO To play .hack a stereo tape or dual sound track
tape with main and sub sound VTR
1 To play back dual sound track tape with main
sound
2 To play back a dual sound track tape with sub
sound
AUDIO MIX To adjust the balance between the stereo 1 and
stereo 2
II n
STl A. ST2
VTR
PB MODE • auto To automatically select the system (Hi8/
standard 8 or DigitalS) that was used to record
on the tape, and play back the tape VTR
HiB/a To play back a tape Uiat was recorded in the
Hi8/standard 8 system when your camcorder
does not automatically distinguish the
recording system
B VF B.L • BRT NORMAL To set the brightness in the viewfinder normal VTR
BRIGHT To brighten the viewfinder ■ CAMERA
Notes on AUDIO MIX
• You can adjust the balance only tor tapes recorded in the Digitals E) system.
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE .
The mode will return to the factory setting when:
• you remove the battery pack or power source.
• you turn the POWER switch.
Notes on VF B.L
•When you select "BRIGHT", battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
54