Sony DCR-TR7000 - Manual (Page 24)

I
Playing back a tape
24
*
To operate control buttons, set the POWER switch to VTR.
To view a still picture (playback pause)
Press il during playback. To resume playback, press II or I
To advance the tape
Press ►► in the stop mode. To resume normal playback, press I
To rewind the tape
Press in the stop mode. To resume normal playback, press I
To change the playback direction
Press < on the Remote Commander during playback to reverse the playback direction.
To resume normal playback, press ►.
To locate a scene monitoring the picture (picture search)
Keep pressing or ►► during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing or
rewinding the tape (skip scan)
Keep pressing while rewinding or ►► while advancing the tape. To resume
rewinding or advancing, release the button.
To view the picture at slow speed (slow playback)
Press !► on the Remote Commander during pla^ack. For slow playback in the reverse
direction, press <, then press !► on the Remote Commander. To resume normal
playback, press ►.
To view the picture at double speed
Press x2 on the Remote Commander during playback. For double speed playback in the
reverse direction, press <, then press x2 on the Remote Commander. To resume
normal playback, press ►.
To view the picture frame-by-frame
Press !!► on the Remote Commander in the playback pause mode. For frame-by-frame
playback in the reverse direction, press -^11. To resume normal playback, press ►.
•
In the various playback modes
• Noise may appear when your camcorder plays back tapes recorded in the Hi8/
standard 8 system.
• Sound is muted.
• The previous recording may appear as a mosaic image when playing back in the
Digitals H system.
When the playback pause mode lasts for 3 minutes
• Your camcorder automatically enters the stop mode. To resume playback, press I
• The previous recording may appear.
Slow playback for tapes recorded in the DigitaiS i) system
The slow playback can be performed smoothly on your camcorder; however, this
function does not work for an output sigrtal from the g DV IN/OUT jack.