Sony DCR-TR7000 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Fader function

Notes

•The overlap function works only for tapes recorded in the DigitalS I) system.
• You cannot use the following functions while using the fader function. Also, you

cannot use the fader function while using the following functions.
- EHgital effect
- Low lux mode of PROGRAM AE (Overlap function only)
- NightShot +SI0W shutter
- Photo recording

When the OVERLAP indicator appears

The camcorder automatically memorizes the image recorded on a tape. As the image is
being memorized, the OVERLAP indicator flashes fast, and the playback pictiue is
displayed. At this stage, the picture may not be recorded clearly, depending on the tape
condition.

When START/STOP MODE is set to 1 or 55EC

You cannot use the fader function.

While using the bounce function, you cannot use the following functions:

-Exposure
-Focus
-Zoom
-Picture effect

Note on the bounce function

The BOUNCE indicator does not appear in the following mode or functions:
- D ZOOM is set to ON in-tKe MENU settings
- Wide mode
-Picture effect
- PROGRAM AE