Recording a midi file – Sony PCV-90 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Introducing the Sony A/V Suite
Recording a MIDI File
You can make MIDI recordings easily using the MIDI Player and
a MIDI instrument. Before you record a MIDI file, you musf connect a
MIDI instrument to the MIDI interface connector on the back panel
of your Sony PC (see "Connecting a Joystick or MIDI Instrument" on
page 14).
1
Click the MIDI Player on the A/V Wall.
2
Click (Record). The red light blinks, indicating that the MIDI
Player is in Record Standby mode.
3
Click
(Play) to begin recording, and then start playing the MIDI
5
6
instrument.
If necessary, click (Pause) to pause temporarily during recording.
Click (Pause) again to resume recording.
Note
Be sure to use the \
» |
(Pause) button to resume recording. If you click \ *
|
(Record) to resume recording, you erase the existing recording and start a
new one.
After you finish recording, click (Stop).
Click I
(Play) to hear the recording.
Note
^ You can repeat steps 1 through 6 until you arc ready to save the recording.
7
When you're ready to save the recording, open the file menu and
selecf Save, and then type a file name.
Note
A Change drives and folders, as necessary, to save the file to the correct location. If
you don't want to save the recording, record over it or close the file.
8
Click the OK button to save the file.
68