Sony PCV-90 User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Upgrading and Maintaining Your Sony PC
6
Install the new battery with the plus (+) side up.
WARNING
A\Tlu’rc is danger of explosion if you replace the battery incorrectly. You must
replace the battery only with a CR2032 type lithium battery. Discard used
batteries according to the instructions on page 210.
7
Reinstall any add-in cards that were removed, and replace the side
panel as described on page 101.
Note
^ The values stored in the CMOS memory are now reset to the factory default
values. You must run the Setup utility to reset the date, time, passwords, and
other options. See the online
System Reference Manual
for details.
8
To run the Setup utility, press F3 for a few seconds while rebooting
your PC, then press and hold FI to run the BIOS setup utility.
9
Change the default values to the values you wrote down in step 2.
10
Save your Setup changes, and then exit the Setup utility.
98