Tomei Powered TITANIUM MID Y PIPE - Manual (Page 5)

KIT CONTENTS
Below are the kit contents. The quantity of each items are noted in brackets ().
REQUIRED TOOLS
FLANGE NUT(4)
BOLT SMOOTH PASTE(1) EXPREME Ti STICKER (2)
CLAMP BAND (2)
FLANGE BOLT
M10 P=1.25 L=25 (2)
GASKETΦ60 (2)
GASKETΦ80 (1)
FRONT PIPE R (1)
FRONT PIPE L (1)
BLIND PLUG(1) COPPER
WASHER(1)
COLLECTOR PIPE (1)
5
REQUIRED TOOLS
The following tools are the bare minimum required for the job.
CAUTION
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified. If attempt was made to use
this product on another engine/car, other than specified, then you will risk damaging this kit and or
the engine, or components related with it.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures,
injuries or bodily harm.
WARNING
■ This product is to be installed, when both the engine and engine bay is cold.
■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
* General Engine Maintenance Tools * Torque Wrench * Service Manual
5