Tomei Powered EXHAUST MANIFOLD (GDB/GRB/GVB) - Manual (Page 6)

6
KIT CONTENTS
REQUIRED TOOLS
The following tools are necessary for the installation.
* General Maintenance Tools *Torque Wrench *Workshop Service Manual
CAUTION
■ This product is only for vehicle use under a closed circuit and for public roads.
■ The technician for this installation must be a licensed mechanic, which holds a thorough understanding for
installations.
■ Only install this product on the specific model as stated above. If installed on a differant model, possible
engien damage will occur.
■ Only use the proper tools during installation. If wrongful tools are used, possible injury will occur.
■ Install this item when the engine is cold.
■ The installation of all kit components must always be done with care as there is always a possibility of
engine fire. It is best to Install this part(s) when the engine & engine bay is cold.
■ Do not use excessive force when removing and installing parts. As this may cause damage to the parts
and related components.
■ Check for signs of fuel leaks and bleed the system properly before driving. Since this is related to fuel,
take care to avoid any fire hazards.
Bolt Smooth Paste (1)
Sticker (2)
Stud Bolt (4)
Bolt M10 x 1.5 (3)
Please confirm that your kit is complete. Each item shows the quantity of each item.
GASKET
(Support Pipe - T/C) (1)
GASKET
(Header-Manifold) (2)
(Manifold-Support Pipe) (1)
GASKET
(T/C-Catalyser) (1)
Washer (3) Nut (3) Bandage (1)
Short Bandage Band (8)
Exhaust Manifold (1)
Long Bandage Band (3)