Tomei Powered EXHAUST SYSTEM - Manual (Page 6)

KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS
These tools are the bare minimum required for the job.
・General Engine Maintenance Tools ・Torque Wrench ・Official Service Manual
CAUTION
■ This product is designed to be used for off road competition purposes only.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ This product was designed specifically for the application specified. If the attempt was made to use
this product on another engine/car other than specified then you will risk damaging this kit and
or the engine or components related with it.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures
and injuries or bodily harm.
WARNING
■ This product is to be installed when the engine and engine bay is cold.
■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.
6
Exhaust Manifold (1)
Front Pipe (1)
※ Shown is the Metal Catalyzer version
Back Pipe (1)
※ Shown is the Metal Catalyzer version
Front Pipe Gasket (1)
Tail End Gasket (1)
Flange Bolt (2) Cap Bolt (2) Dish Washer （2） Flange Nut (4) Exhaust Manifold Gasket (1)
Thermal Bandage (1)
Cable Tie Large (6)
Cable Tie Short (8)
Cable Tie (2)
Sticker (2)
Bolt Smooth Paste (1)
Supplied with the Metal Catalyzer Kit
Smog Emissions Certificate (for Japan only)（1）
Blind Plug （1）
Copper Washer （1）