Tomei Powered STRAIGHT DOWN PIPE for WRX STI USDM - Manual (Page 9)

4. Post-installation checks
1. Check to ensure the product is fitted correctly.
2. Start the engine and rev to 2500rpm to check for any abnormal sounds.
3. Test drive the vehicle and check for abnormal sounds and/or loose parts.
WARNING
・ Be thorough when performing checks as incorrect fitment or loose parts can result in reduced
performance and/or damage to other surrounding parts and components.
・ Exhaust leaks not only reduce performance but can also be a health hazard and should be
addressed immediately.
・ When using the vehicle, If there any abnormalities, stop the vehicle immediately and check
for faults.
・ Ensure the engine and/or engine bay is cool before attempting any repairs.
・ Should any part fall off, do not restart the engine. Consult a trained professional and follow
their instructions.
CAUTION
・ Once installed on the vehicle, the engine characteristics may change drastically depending
on the setup.
After installation, adjust the engine settings as necessary.
9