Tomei Powered TURBO SUCTION HOSE - Manual (Page 7)

7
KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS
These tools are the bare minimum required for the job.
CAUTION
■ Throughly read this installation manual prior to be sure that you are completley confident with the task.
■ This product is designed for competition used ONLY. Not to be used on public roads.
■ This product is to be fitted by an experienced professional in a fully equipped workshop.
■ This product was specifically designed to be application specific. This is not a universal product.
If installed on any other vehicles/engines, this product may sustain damage and/or cause engine failure.
■ The engine power output will improve with this product. So when using this product, the ECU will require
a new mapping/tune. Be sure to prepare any other parts that are required, that isn't included in this kit
to complete the installation.
■ Do not use excessive force when removing and installing parts. As this may cause damage to the parts
and related components.
WARNING
■ Note: Tomei will not be held liable for any accidents caused by the incorrect installation of that product.
■ The correct tools, equipment and protective clothing are to be used during installation to prevent bodily
harm and injuries.
■ This product is to be installed when the engine is cold to prevent risk of burns.
■ Carefully check that there are no missing parts as it can pose a fire risk and possible terminal engine
failure if something has not been installed correctly. Double check everything before starting the engine.
■ Operating the engine indoors poses a danger risk of carbon monoxide poisoning. Make sure the place is
well ventilated when working indoors.
* General Engine Maintenance Tools * Workshop Service Manual *Threadlock Paste
SUCTION HOSE (1)
ADAPTER
A:φ56-60 t=2 (1)
B:Φ58-60 t=1 （1）
RUBBER CAP (2)
HOSE BAND
59-82mm （1）
52-76mm (1)
21-44mm (2)
15-22mm (1)