Tomei Powered TURBO SUCTION HOSE - Manual (Page 10)

10
7 Return the other parts that were removed.
Check the diameter of your turbo, and then use the right adapter ring to suit your turbo inlet size.
Turbo Compressor intake size diameter φ56mm
(GDB Stock Turbo)
Use adapter A
Turbo Compressor intake size diameter φ58mm
(ARMS M7760, M7960, GRB Stock Turbo)
Use adapter B
Turbo Compressor intake size diameter φ60mm
(ARMS M8265)
No adapter required.
Stock OEM Part Number 11818AA000 (CONN AY-PCV HOSE)
1 Use needle nose pliers to extract the pin.
2 Insert the extracted coupler pin that was removed.
3 Wrap the connector with tape to prevent the pin from falling off.
Using Adapter A/B
The following steps are for USDM models that are using the 11818AA000 (CONN AY-PCV HOSE).