Tomei Powered OIL PAN BAFFLE PLATE - Manual (Page 5)

KIT CONTENTS
Below is the contents of this kit with the quantity listed in brackets ().
REQUIRED TOOLS
These tools are the bare minimum required for the job.
・General Engine Maintenance Too・Workshop Service Manual
・Torque Wrench
・Drill φ5mm ・Drive Shaft Oil Seal
CAUTION
■ These products are designed to be used for off road competition purposes only.
■ This product is NOT for use on public roads, due to safety risks. This product may not be road legal in your
area.
■ This product is to be installed by a qualified professional in a fully equipped workshop.
■ If the attempt was made to use this product on another engine/car other than specified then you will risk
damaging this kit and or the engine or components related with it.
■ Do not overtighten the bolts when installing the product, you can risk damaging the bolt and or the product(s).
Only use the torque specs as specified in this manual or workshop service manual.
■ Please periodically inspect the tightened sections.
Spacer （1）
Horizontal Baffle （1）
Verticle Baffles （1）
Bolt M6 L10（2）
Bolt M6 L15（1）
Washer 6mm（3）
5
■ Please periodically inspect the tightened sections.
■ Do not use any excessive force when using this product as you risk damaging the product or other parts.
■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures and
injuries or bodily harm.
WARNING
■ After making adjustments on the oil pan, please throughly clean it prior to final assembly.
■ Please use a high grade oil cooler to suit the upgrade.
5