ClearSounds PHONE A1600 - Manual (Page 63)

63 – ENGLISH
For optimal speakerphone performance, avoid the following:
• Areas with high background noise (The microphone might
pick up these sounds and prevent the speakerphone from
going into the receiving mode when you finish talking).
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or
next to a cabinet, which can generate an echo effect.
█ Answering a Call from the Cordless Handset
Cordless Handset out of the base
1. To answer a call, press and speak into the handset.
2. Adjust your volume and tone settings if needed.
3. To end the call, press or replace the handset to the base.
Cordless Handset in the base
1. If you have activated the Auto Answer function
(see page 58), simply lift the handset out of the base
and speak into the handset.
2. If you have not activated the Auto Answer function, lift
the handset out of the base and press and speak
into the handset.
3. Adjust your volume and tone settings if needed.
4. To end the call, press or replace the handset to
the base.
After you hang up, the LCD will display the call duration.
During the call, the base LCD will display the call duration.
█
Making a Call from the Cordless Handset
1. Pick up the handset and press . The icon appears
on the LCD. Listen for a dial tone.
2. Dial a number. If you make a mistake while entering a
number, hang up and begin again.
3. Adjust your volume and tone settings if needed.
4. To end the call, press or replace the handset to the base.