ClearSounds PHONE A1600 - Manual (Page 51)

51 – ENGLISH
Note : If you selected the current handset or a non-registered
handset, a warning tone will be heard.
█
Base Selection
This function allows you to select a base from those already
registered to the handset. To select a base:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to HS Settings and then
press under the word Select.
3. Press up or down to scroll to Selected Base and
then press under the word Select.
4. Press up or down to select the base you want and
then press under the word Select. If you select a
non-existent base, the handset will sound a warning tone.
5. The display will show Searching and then BS
Selected . The display will automatically return to the
previous menu screen.
█
Handset Reset
This function allows you to reset the handset settings for
Alarm, Audio Setup, Ring Setup, Tone Setup, Language, HS
Name, Auto Answer and Date & Time to the initial factory
settings. To reset the handset:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to Default and then press
under the word Select. You will be prompted to enter
the PIN.
3. Enter the PIN (the default PIN is 0000) and then press
under the word Select. If the PIN is validated, the display
will show Confirm?.
4. Press under the word Select to confirm or press under
the word Back to cancel and exit.
If successful, the handset settings will be reset to the initial
factory settings, otherwise the settings will remain. After
resetting, the handset will return to standby mode.