ClearSounds PHONE A1600 - Manual (Page 31)

31 – ENGLISH
Your ClearSounds® A1600 comes from the factory preset for
Caller ID on Call Waiting ON. To change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press to scroll to Set Phone and then press under
the word Select.
3. Press to scroll to Call Waiting and then press under
the word Select.
4. Press or to choose between ON/OFF to activate/
deactivate the call waiting function and then press
under the word Select.
Note : If you subscribe to Call Waiting on Caller ID, you will
receive Caller ID information (if available) on Call Waiting calls
(see page 41).
If you subscribe to Call Waiting service from your local phone
provider, during a phone call you will hear a beep to indicate
another call is waiting on the line.
1. To connect to the waiting call, press the Call Waiting
key, and your original call is put on hold. The display
will show F.
2. To switch between the two calls, press the Call Waiting key.
█
Auto On Hook
Your ClearSounds® A1600 comes from the factory preset
for Auto On Hook set to OFF. This feature can automatically
disconnect the line after 15-30 minutes if the phone is
left off the hook. This will restore your line to be able to
receive another call even if the call is not disconnected. To
change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press to scroll to Set Phone and then press under
the word Select.
3. Press or to scroll to AUTO ON HOOK and then
press under the word Select.
4. Press or to select On or Off and then press
under the word Save.