ClearSounds PHONE A1600 - Manual (Page 44)

44 – ENGLISH
Character Map
To enter a specific
alphanumeric character,
press the relevant key
one or more times for
the required character
according to the following
table: once for the first
character, twice for the
second and so on.
Clarification :
• If you want to shift the case between upper and lower,
between entering letters, press the * key.
• When entering the same letter twice or a different letter
with same key, wait for a few seconds for the cursor to move
automatically and then select the next letter.
█
Adding Phonebook Entries
1. Enter a phone number while in standby mode and then
press under the word Save.
2. The number will appear on the display. Press under
the word Save.
3. “Name:” will appear on the display. Enter the name you
want to use and then press under the word Save.
4. The display will show the list of ring tones to select from.
Press or to select the desired ring tone. Press
under the word Select.
5. Repeat if necessary.
Note : If you make a mistake while entering a name or a
number, press under the word Clear to correct it. Each
time you press this key, the last digit is deleted.