ClearSounds PHONE A1600 - Manual (Page 33)

33 – ENGLISH
To change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press or to scroll to Set Talk and then press
under the word Select.
3. Press or to scroll to REVIEW TALKING and then
press under the word Select.
4. Press or to select ON/OFF to activate/deactivate
the talking review function and then press under
the word Select.
█
Using the Hands-Free Headset or Audio Jack
Your phone is equipped with 2 Headset jacks and 1 Audio
Neckloop Jack. One headset jack is located on the left side of
the handset and the other headset jack is located on the left
side of the base. The audio jack is located on the left side of
the base. These jacks are amplified, allowing you to adjust
both the tone and volume the same as you would through the
handset (see page 34 for amplification instructions).
The Audio Neckloop Jack - the 3.5mm Audio Neckloop jack
allows you to listen through your device while speaking into
the speakerphone.
The Headset Jack – the 2.5mm Headset jack allows you to
listen and speak through your hands-free headset. This 2.5mm
phone headset jack accommodates a variety of optional hands-
free accessories including headphones, neckloops, silhouettes,
and cellular accessories.
When a 2.5mm audio device is plugged in, the incoming audio
signal to the handset will now be transferred to the headset
jack. No output on the handset or speakerphone will be heard.
BASIC PHONE FUNCTIONS