ClearSounds PHONE A1600 - Manual (Page 52)

52 – ENGLISH
█
Out of Range Alarm
This function allows you to know when the handset is out of
range of the base, and a beep will sound. Your ClearSounds®
A1600 comes from the factory preset for Out of Range Alarm
ON. To change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to HS Settings and then
press under the word Select.
3. Press up or down to scroll to Tone Setup and then
press under the word Select.
4. Press down to select Range Alarm and then press
under the word Select.
5. Press up or down to select On or Off and then press
under the word Select.
█
Dialing Mode
Your ClearSounds® A1600 comes from the factory preset for
touch-tone service. Should you need to change this setting
based on the type of phone service you have, use Tone for
touch-tone service or Pulse for rotary dialing. NOTE: If you
are not sure which dialing mode to select, please contact your
local phone service provider. To change this setting:
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to BS Settings and then
press under the word Select.
3. Press down to select Dial Mode and then press
under the word Select.
4. Press up or down to select Tone or Pulse and then
press under the word Select.