ClearSounds PHONE A1600 - Manual (Page 36)

36 – ENGLISH
█
Using your Base Speakerphone
When using the speakerphone, you can enjoy the convenience
of hands-free conversation.
For optimal speakerphone performance, avoid the following:
• Areas with high background noise (The microphone might
pick up these sounds and prevent the speakerphone from
going into the receiving mode when you finish talking).
• Surfaces affected by vibration.
• Recessed areas such as in a corner, under a cupboard, or
next to a cabinet, which can generate an echo effect.
█
Answering a Call
1. To answer a call, press the Speaker key on the base.
2. Adjust your volume by using the volume control V- or V+
located on right side of the phone.
3. To end the call, press the Speaker key again on the base.
The display will show a Hold option once you have a call
established. To put a call on hold:
1. Press
under the word Hold once. The LCD will display
“Call on hold.”
2. To continue the conversation, simply press under the
word unhold.
█
Making a Call
1. Press the Speaker key on the base and listen for a dial tone.
2. Dial the number you want to call.
3. Adjust your volume by using the volume control V- or V+
located on right side of the phone.
4. When finished, press the Speaker key to hang up.
The display will show a Hold option once you have a call
established. To put a call on hold:
1. Press under the word Hold once. The “LCD will display
“Call on hold”.
2. To continue the conversation, simply press under the
word Unhold.