ClearSounds PHONE A1600 - Manual (Page 57)

57 – ENGLISH
1. Press under the word Menu on the screen to display
the main menu list.
2. Press up or down to scroll to HS Settings and then
press under the word Select.
3. Press down to scroll to Ring Setup and then press
under the word Select.
4. Press under the word Select to select INT Ring or press
down to select EXT Ring, and then press under
the word Select.
5. Press up or down to select the ring tone
from Melody 1-Melody 10. When adjusting the Melody,
the handset plays the selected melody.
6. Press under the word Select.
7. To adjust the volume level, select Ring Volume and then
press under the word Select. You can select and adjust
the volume from Volume 1-Volume 5, or Off. When adjusting
the Volume, the handset plays the selected loudness.
8. Press under the word Select.
Note : If you set the volume to “Off”, when a call comes in, only
the New Call information appears on the LCD and the phone
will not ring.
Visual and Vibrating Ringer
You can activate the visual ringer and vibrating handset
function. A bright LED light will flash and the handset will
vibrate when the phone rings. To turn this feature on/off:
In standby mode, press and hold until the icon appears
to activate and press and hold again to deactivate.