ClearSounds PHONE A1600 - Manual (Page 29)

29 – ENGLISH
In standby mode, you can adjust the ringer volume by using
the Volume Control V- or V+ on the right side of the phone.
The display will show the current level. For example: Volume
3 . You will also hear the audible ringer at each level you select.
Visual Ringer & Shaker Option
Your phone is equipped with a bright LED light that can flash
a very bright light when the phone rings. If you have selected
the LED light to be ON, it will flash on all volume levels.
Your phone is equipped with a 3.5mm vibrating alert jack for
an optional bed shaker (purchased separately) to alert you
when the phone is ringing. Simply plug it into the shaker jack
and place it between your mattress and box spring or under
the cushion of a chair. When the phone rings, the pad will
vibrate with each ring of the phone.
█
Keypad Tones Setting
Your ClearSounds® A1600 comes from the factory preset for
menu Keypad Tones ON. This refers to having an audible tone
when navigating the menu to verify a selection. To change this
setting:
1. Press under the word Menu on the screen to display the
main menu list.
2. Press to scroll to Set Phone and then press under
the word Select.
3. Press under the word Select again to select Set Ring.
4. Press or to scroll to Keypad Tones and then press
under the word Select.
5. Press or to choose between ON/OFF and then press
under the word Select.