Canon FAX-L290 - Manual (Page 29)

Chapter 3 Printing 3-9
Pr
in
ti
n
g
Meeting Size Requirements
When defining the custom form, the size and printer area margins you set
must meet certain requirements.
When setting the custom size:
The width and height must meet the following minimum and maximum
measurements:
❏ Width: 7.62 cm (3.00 inches) to 21.59 cm (8.50 inches)
❏ Height: 12.70 cm (5.00 inches) to 35.56 cm (14.00 inches).
The height must be greater than the width.
When setting the printer area margins:
The margins must be set as follows (if you set the custom-sized width less
than 21.20 cm (8.35 inches)):
❏ Top margin: 0.20 cm (0.08 inch)
❏ Bottom margin: 0.60 cm (0.24 inch)
❏ Left margin: 0.20 cm (0.08 inch)
❏ Right margin: 0.20 cm (0.08 inch).
If you set the custom-sized width greater than 21.20 cm (8.35 inches), you
must calculate the left and right printer area margins as follows:
[width] minus 20.80 cm (8.19 inches) divided by 2 equals [left/right
margin]
For example, if you set the width to 21.59 cm (8.50 inches), calculate the
left and right margins as follows:
21.59 cm (8.50 inches) minus 20.80 cm (8.19 inches) divided by 2
equals 0.395 cm (0.155 inch)