Dell Dimension 4300 - Manual (Page 17)

Setting Up 17
3 Turn on the printer and then turn on the computer. If the Add New
Hardware Wizard window appears, click Cancel.
4 Install the printer driver if necessary (see "Installing the Printer Driver"
on page 18).
USB Printer
Follow the instructions that came with the USB printer to connect it to the
computer. If no information is provided, then follow the instructions in this
section.
HINT: You can connect
USB devices while the
computer is turned on.
1 Install the printer driver if necessary (see the following section).
2 Attach the USB printer cable to the USB connector on the computer
and the printer. The USB connectors only fit one way.
HINT: Your computer has
two USB connectors on
the back panel (see
page 61) and two USB
connectors inside the door
on the front panel (see
page 61).
USB printer
cable
USB connector
USB connector
on printer
2H930bk1.book Page 17 Tuesday, November 20, 2001 5:02 PM