Dell 944 All In One Inkjet Printer - Manual (Page 62)

Improving Print Quality
If you are not satisfied with the print quality of your documents, there are several different ways to improve the print quality.
l Use the appropriate paper. For example, use Dell Premium Photo Paper if you are printing photos with a photo ink cartridge.
l Use paper that is a heavier weight, bright white, or coated. Use Dell Premium Photo Paper if you are printing photos.
l Select a higher print quality.
To select a higher print quality:
1. With your document open, click File® Print.
The Print dialog box appears.
2. Click Preferences, Properties, or Options (depending on your program or operating system).
3. On the Quality/Copies tab, select Quality/Speed and select a higher quality setting.
4. Print your document again.
5. If the print quality does not improve, try aligning or cleaning the ink cartridges. For more information on aligning, see Aligning Ink Cartridges . For more
information on cleaning ink cartridges, see Cleaning the Ink Cartridge Nozzles .
For additional solutions, go to support.dell.com .
1. Add paper.
2. Press Select to continue.
button to continue printing. For more information, see
Loading Paper .
Photo Mode
No supported images found on the
memory card.
The card that is inserted in the printer does not contain
any supported image formats. Remove the memory card.
PictBridge Port
The attached camera or device does
not support PictBridge.
Please disconnect it.
The attached device is not supported, or the PictBridge-
enabled digital camera is not set to the correct USB
mode. Please disconnect the device or check the USB mode
setup. Refer to the documentation that came with your
digital camera for more information.
Size Warning
The paper inserted is smaller than
the selected Blank Paper Size.
Press Select to continue or press
Cancel to go back and retry your job.
The paper in the printer is smaller than the selected
Blank Paper Size. Change the Blank Paper Size to match the paper in the
printer, or press the Select button to continue
printing.
Low Ink Error The ink cartridge is running low on ink. The Low Ink
Error occurs when your ink cartridges reach levels of 25
percent, 15 percent, and 10 percent remaining. Replace the ink cartridge. For more information, see
Replacing Ink Cartridges .
Only one device or media card is
allowed. Please remove all device(s)
and card(s). More than one memory card or device is inserted in the
printer. Remove all memory cards and devices.