Dell Precision 470 - Manual (Page 96)

Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
1 audio cable (some drives do not have this cable)
2 CD/DVD drive cable
3 power cable
7. If you are installing a new CD/DVD drive rather than replacing a drive, remove the
front-panel inserts.
From inside the drive bay, gently press on each side of the insert until it pops out.
8. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
9. Close the computer cover .
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
10. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
11. Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives: Secondary to
Auto. See " Advanced Features " for more information.
12. To verify that your computer works correctly, run the Dell Diagnostics .
Cards
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.