Dell Precision 470 - Manual (Page 101)

Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
b. Connect external audio devices to the audio connectors on the back panel of the computer.
10. If you removed an add-in network connector:
a. Enter system setup, select Integrated Devices, and then change the setting for Network Interface Card to
On.
b. Connect the network cable to the integrated connector on the back panel of the computer.
PCI Express Cards
Your computer supports one PCI Express x16 card and one PCI Express x8 card, runs at x4 only.
1 PCI Express x16 card
2 PCI Express x16 card slot
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not
replacing a PCI Express card, see " Removing a PCI Express Card ."
If you are replacing a card, remove the current driver for the card from the operating system.
If you are installing or replacing a PCI card, see " Installing a PCI Card ."
Installing a PCI Express Card
1. Follow the procedures in " Removing and Replacing Parts ."
2. Press the lever on the card retention arm and raise the retention arm.