beautypg.com

Dell PowerVault 110T LTO2 (Tape Drive) User Manual

Page 29

background image

9. With the small-blade screwdriver, continue to rotate the loader motor gear in the unload direction (counterclockwise):

¡

If you feel no resistance to the allen wrench and the cartridge slowly moves up and out of the tape load compartment to the fully ejected position, the procedure
was successful. Remove the small-blade screwdriver and go to step 10.

¡

If you feel resistance to the allen wrench and the cartridge does not move, the loader mechanism is jammed or the leader block is not at the home position.

10. Remove the tape cartridge.

11. To ensure that the drive operates properly, run tape drive diagnostics (see Function Code 1 in

Selecting a Diagnostic or Maintenance Function

).

Back to Contents Page

See also other documents in the category Dell Computer hardware: