Dell Inspiron 9300 - Manual (Page 56)

56
Solving Problems
www
.dell.com | support.dell.com
DVD drive problems
NOTE:
High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a
defect in the drive or the CD or DVD.
NOTE:
Because of different regions worldwide and different disc formats, not all DVD titles work in all
DVD drives.
Problems writing to a DVD+RW drive
C LEAN THE DRIVE OR DISK — See the Dell Inspiron Help file. To access the help file, see page 9.
E NSURE THAT THE C D IS SNAPPED ONTO THE SPINDLE
C HECK THE CABLE CONNECTIONS
C HECK FOR HARDWARE INCOMPATIBILITIES — See "Resolving Software and Hardware
Incompatibilities" on page 76.
R UN THE D ELL D IAGNOSTICS — See "When to Use the Dell Diagnostics" on page 53.
C LOSE OTHER PROGRAMS — The DVD+RW drive must receive a steady stream of data when writing.
If the stream is interrupted, an error occurs. Try closing all programs before you write to the DVD+RW.
T URN OFF STANDBY MODE IN W INDOWS BEFORE WRITING TO A D V D + R W DISC — See the Dell
Inspiron Help file or search for the keyword standby in the Windows Help and Support Center for
information on power management modes. To access help, see page 9.
C HANGE THE WRITE SPEED TO A SLOWER RATE — See the help files for your DVD creation software.
V ERIFY THE CORRECT MEDIA IS IN USE — DVD+RW drives may use any CD media such as CD-R or
CD-RW, but when using your DVD+RW to write to DVD media, be sure to use DVD+R or
DVD+RW media only. Using DVD-R/RW media may lead to DVD playback problems or incomplete
write or verify operations.