Dell Inspiron 9300 - Manual (Page 43)

Using CDs, DVDs, and Other Multimedia
43
7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on
the computer.
8 See "Enabling the Display Settings for a TV" on page 43 to ensure that the computer
recognizes and works properly with the TV.
Changing Your Audio Settings
You can set the speaker configuration for PC speakers, headphones, or S/PDIF (digital output).
1 Double-click CyberLink PowerDVD in the All Programs menu.
2 Click Settings.
3 Click DVD.
4 Click Audio Settings.
5 Under Speaker Configurations, select your desired output.
6 Click Back twice to return to the main menu.
If you selected SPDIF in step 5, also verify the following settings:
a Exit PowerDVD.
b Double-click the speaker icon in the Windows notification area.
c Click the Options menu and then click Advanced Controls.
d Click Advanced.
e Click Enable S/PDIF.
f Click Close.
g Click OK.
h Reopen PowerDVD.
7 Insert a DVD into the DVD drive.
The DVD will autorun.
Enabling the Display Settings for a TV
Your computer may have either an ATI video-controller card or an NVIDIA video-controller card.
See the following subsection that corresponds to the video controller installed in your computer.
ATI Video-Controller Card
NOTE:
Ensure that you properly connect the TV before you enable the display settings.
1 Click the Start button and click Control Panel.
2 Click Appearances and Themes.
3 Under or pick a Control Panel icon, click Display.