System setupdell dimension 5150c service manual, System setup, Entering system setup – Dell Dimension 5150C User Manual
Page 58: Overview, System setup screens
System SetupDell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/syssetup.htm[10/31/2012 8:21:30 AM]
System Setup
Dell™ Dimension™ 5150C Service Manual
Overview
Use system setup as follows:
To change the system configuration information after you add, change, or remove any hardware in your computer
To set or change a user-selectable option such as the user password
To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen information for future
reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes can
make your computer work incorrectly.
Entering System Setup
1. Turn on (or restart) your computer.
2. When the blue DELL™ logo appears, press
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows®
desktop. Then shut down your computer and try again.
System Setup Screens
The system setup screen displays current or changeable configuration information for your computer. Information on the
screen is divided into three areas: the options list, active options field, and key functions.
Options List — This field appears on the left side of the system setup
window. The field is a scrollable list containing features that define the
configuration of your computer, including installed hardware, power
conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option
Option Field — This field contains
information about each option. In this field
you can view your current settings and make
changes to your settings.
Use the right- and left-arrow keys to
highlight an option. Press
that selection active.