Dell Dimension 5150C - Manual (Page 41)

Replacing the Computer Cover: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/cvrcls1.htm[10/31/2012 8:21:13 AM]
Back to Contents Page
Replacing the Computer Cover
Dell™ Dimension™ 5150C Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1. Ensure that all cables are connected and folded out of the way.
Pull the power cables toward you so that they do not get caught underneath the drives.
2. Ensure that no tools or extra parts are left inside the computer.
3. Install the cover:
a. Align the bottom of the cover with the tabs located along the bottom of edge of the computer.
b. Using the tabs as leverage, rotate the cover downward.
c. Snap the cover into place by pulling back on the cover release latch, and then releasing the latch when the cover
is properly seated.
d. Ensure that the cover is seated correctly before moving the computer to the upright position.
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
4. Connect your computer and devices to electrical outlets, and turn them on.
Back to Contents Page