Power supply, Removing the power supply – Dell Dimension 5150C User Manual
Page 33
Removing and Installing Parts: Dell Dimension 5150C Service Manual
file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]
d. Carefully route the cable wire and reconnect the modem cable to the modem.
.
Power Supply
Removing the Power Supply
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in your
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
2. Disconnect the AC power cable from the power supply connector.
3. Open the
4. Disconnect the DC power cables from the system board and the drives.
5. Remove the three power supply screws.
6. Slide the power supply approximately 1 inch toward the front of the computer.