Replacing the front alienfx led board, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 73

Replacing the front AlienFX
LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the front AlienFX LED boards with the screw holes
on the tubes.
2 Replace the screws that secure the front AlienFX LED boards to the tubes.
3 Connect the front AlienFX LED board cables to the front AlienFX LED
boards.
4 Align the screw holes on the front AlienFX LED boards with the screw holes
on the computer base.
5 Replace the screws that secure the front AlienFX LED board to the
computer base.
Post-requisites
1
Follow the procedure from step 5 to step 11 in “Replacing the
”.
2 Replace the
3 Replace the
.
4 Replace the
.
73