Dell Alienware 15 (Early 2015) - Manual (Page 106)

Replacing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Adhere the Alienware AlienHead LED board to the display back-cover.
2 Route the Alienware AlienHead LED cable on the display back-cover and
adhere it to the display back-cover.
3 Adhere the tape that secures the Alienware AlienHead LED board to the
display back-cover.
Post-requisites
1 Follow the procedure from step 4 to step 5 in "Replacing the display back-
cover ".
2 Replace the display panel .
3 Follow the procedure from step 2 to step 5 in “Replacing the display bezel ”.
4 Replace the display assembly .
5 Replace the hinge covers .
6 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
7 Replace the wireless card .
8 Replace the solid-state drives .
9 Replace the memory modules .
10 Replace the base panel .
106