Replacing the camera, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 102: Camera

Replacing the camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts, adhere the camera module to the display back-
cover.
2 Connect the camera cable to the camera module and adhere the tape that
secures the camera cable to the camera module.
Post-requisites
1
Replace the
.
2 Follow the procedure from step 2 to step 5 in “Replacing the
”.
3 Replace the
4 Replace the
.
5 Follow the procedure from step 5 to step 11 in “Replacing the
”.
6 Replace the
7 Replace the
8 Replace the
.
9 Replace the
.
102