Dell Alienware 15 (Early 2015) - Manual (Page 103)

Removing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel .
2 Remove the memory modules .
3 Remove the solid-state drives .
4 Remove the wireless card .
5 Follow the procedure from step 1 to step 11 in “Removing the palm rest ”.
6 Remove the hinge covers .
7 Remove the display assembly .
8 Follow the procedure from step 1 to step 4 in “Removing the display bezel ”.
9 Remove the display panel .
10 Follow the procedure from step 1 to step 2 in "Removing the display back-
cover ".
Procedure
1 Peel off the tape that secures the Alienware AlienHead LED board to the
display back-cover.
103