Replacing the power-adapter port, Procedure, Post-requisites – Dell Alienware 15 (Early 2015) User Manual
Page 128

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Slide the power-adapter port into the slot on the computer base.
2 Align the screw holes on the power-adapter port bracket with the screw
holes on the power-adapter port.
3 Replace the screws that secure the power-adapter port bracket to the
computer base.
4 Route the power-adapter port cable through the routing guides on the
computer base.
Post-requisites
1
Follow the procedure from step 4 to step 11 in “Replacing the
2 Replace the
3 Replace the
4 Replace the
.
5 Follow the procedure from step 5 to step 11 in “Replacing the
”.
6 Replace the
7 Replace the
8 Replace the
.
9 Replace the
.
128